Chillwind tubular met masts

Quality tubular masts

Representing rugged Scottish engineering, our tubular met masts are proven to survive the most arduous of on-site conditions, up to a height of 90 metres.

These quality tubular masts are assembled by our specialist team in Inverness. They are customised with data loggers and the highest quality instruments to suit each individual client’s requirements, and hot-dip galvanised to give a lifespan of 20+ years.

Chillwind met masts are renowned for their ability to stand up to the worst conditions – they’ve been airlifted into environments as inhospitable as the Norwegian tundra and installed on stormy offshore islands.

Make an enquiry

Features and benefits

Up to 90m height, in a single lift installation
Standardised tubular sections – ease of inspection and convenience of transportation
Each 6m mast section is section is fabricated using S355J2H Circular Hollow Section (CHS) BS EN 10219-1 and hot dip galvanised in accordance to BS EN ISO1461
4-point guy wire and ground anchors, split where necessary
Ground-based, tilt up installation – no climbing or working at height required
20-year warranty on parts and manufacture
Made in Scotland to Dulas factory standards
Accurate installation of instruments at your specified heights and orientations

Technical specifications

Available at a range of heights 10m-90m
Typically 6 measurements heights per tower
Assembly and instrumentation conform to standards outlined in IEC 61400-12-1:2017 and ISO 17713-1

Wind monitoring case studies

See all case studies